سنسور - رسا الکترونیک

This Slide Position Sensor is based on straight-slip potentiometer position sensor and can be combined easily with the Arduino IO/sensor expansion board. The sensor includes two outputs to allow the user to average the values and minimize random sensor fluctuations.

Analog Slide Position Sensor

Description • Live video ready when you are • Quick and easy to employ • Operating voltage: - 9.6 to 12 vdc • Camera Resolution: 640 X 480 Pixels

Aqualens Portable Underwater Viewing System

BMP085 Breakout

4,991,000 ریال

Description High precision barometer sensor module Input voltage：5V Operating temperature：-40 ℃ - +85 ℃ Measure accuracy：0.12hPa/m

BMP180 Barometer Module

3,939,000 ریال

This is a built-in GPS Antenna for DFRobot LEA-6H GPS shield. This GPS Antenna also have amplifing function. Its SMA male header can adapt to most GPS/GSM modules which have MMCX interface. This antenna is so qualified that it has been used on many navegation intruments and cellphones.

Built-in GPS Antenna (with amplifing function)

CMUcam4 شیلد آردوینو

28,900,000 ریال

سنسور CSNE151-100 که درواقع یک سنسور جریان حلقه بسته می باشد بر اساس اصل اثر هال (Hall Effect) و متد فلو مغناطیسی صفر (سیستم فیدبک) عمل می نماید. به این معنا که فلو مغناطیسی همواره در مرکز سنسور در سطح صفر حفظ می گردد. به زبان ساده تر عملکرد سنسور اینگونه است که جریان اصلی از سیم پیچ اولیه عبور کرده و نسبتی از این جریان که متناسب با تعداد دور سیم پیچ ثانویه است در خروجی سنسور ظاهر میگردد. حال از این جریان ایجاد شده جهت بالانس کردن هسته سنسور استفاده شده و در واقع بدین ترتیب یک حلقه بسته تشکیل میگردد. این جریان حلقه بسته می تواند در خروجی سنسور توسط یک مقاومت به ولتاژ تبدیل شده و توسط یک پردازنده اندازه گیری شود.

CSNE151-100

Devantech 8 Pixel Thermal Array Sensor

Description • Relative humidity and temperature measurement • All calibration, digital output • Excellent long-term stability • Completely interchangeable

DFRobot DHT11 Temperature and Humidity

Digital Infrared Motion Sensor

3,990,000 ریال

Digital IR Receiver Module

Digital Magnetic Sensor

Digital Microwave Sensor (آشکار ساز حرکت با مدار تقویت کننده سیگنال خروجی)

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vabiration.

Digital Piezo Disk Vibration Sensor

4,952,000 ریال

This is a digital tilt switch. It can be used as a simple tilt sensor. Simple plug to our IO/Sensor Expansion board, you can make amazing interactive projects.

Digital Tilt Sensor for Arduino V2

1,995,000 ریال

Digital Vibration Sensor

2,993,500 ریال

DVRتک کانال پرتابل با قابلیت ذخیره سازی ویدیو روی کارت حافظه و هارد +اتصال GPS

Description • Compatible with mainstream 2.54 and 4-pin grove interfaces • Switch to shift between analog and digital output • Working voltage: 3.3 or 5V DC • Hysteresis comparator circuit

Electronic Brick Soil Moisture Sensor

Description Gain 26dB VSWR <2.0 Voltage 3.3V +/- 0.5V Current 12mA Weight 18g

Embedded GPS Antenna w/ SMA Connector

myris® provides unparalleled security, is portable, lightweight and is as easy as looking in a mirror.

EyeLock-myris

Fgm3 pro ir سنسور میدان مغناطیس ( مگنتومتری )

25,500,000 ریال

Flat 1600N 3D Force Sensor

Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

Flex Sensor 2.2" سنسور سنجش خمیدگی

Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

Flex Sensor 4.5" سنسور سنجش خمیدگی

Flexiforce Pressure Sensor - 100lbs

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Flexiforce Pressure Sensor - 100lbs.

Flexiforce Pressure Sensor - 1lb

14,845,000 ریال

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Flexiforce Pressure Sensor - 1lb.

Flexiforce Pressure Sensor - 25lbs (1" area)

16,630,000 ریال

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Flexiforce Pressure Sensor - 25lbs.

Description: The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. All you need to do to get this kit set up, simply attach the Lepton® imager module into the provided breakout, connect the headers, and you will be seeing in full darkness in no time!

FLiR Dev Kit

Fms100 سنسور میدان مغناطیس (مگنتومتر OFG )

Description: This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Force Sensitive Resistor - Long

Description: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Force Sensitive Resistor - Square

Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Force Sensitive Resistor 0.5"

9,990,000 ریال

Description: Need to put your finger on the pulse of the Earth? Did I just blow your mind? A geophone works by translating ground movement into voltage, which can easily be read by a microcontroller. The SM-24 geophone element is designed to offer the highest performance in seismic exploration based upon field-proven I/O Sensor technology. Low distortion, combined with excellent specifications, provide high-fidelity data. Basically, it’s a super low frequency microphone for the ground.