The MQ6 is a simple-to-use liquefied petroleum gas (LPG) sensor. It can be used in gas leakage detecting equipment in consumer and industry applications,this sensor is suitable for detecting LPG, iso-butane, propane, LNG. Avoid the noise of alcohol, cooking fumes and cigarette smoke. The sensitivity can be adjusted by the potentiometer.

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vabiration.

This is a digital tilt switch. It  can be used as a simple tilt sensor.  Simple plug to our IO/Sensor Expansion board, you can make amazing interactive projects.

Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

سنسور ژیروسکوپ ۲ محوره با قابلیت اتصال به کنترلر سروو موتورهای داینامیکسل

Micro Altimeter Pressure Sensor MS5607 for Absolute Pressure

• Measurement Range: 0~25%Vol
• Maximum Measurement limit: 30%Vol
• Resolution: 0.15%Vol

LM335 یک سنسور دما با رنج 40- تا 100+ درجه است که دارای دقت 1 درجه و امپدانس دینامیکی خروجی خیلی کم است (کمتر از 1 اهم) .

Description: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.

Description

Non-invasive AC current sensor (15A max)

Used for measuring alternating current

Ferrite core material

The SeeedStudio Non-Invasive AC Current Sensor (15A Max) is a sensor used for measuring alternating current. It is particularly useful for measuring whole building electricity consumption (or generation for that matter). The split core type is particularly suitable for DIY use it can be clipped straight on to either the live or neutral wire coming into the building without having to do any high voltage electrical work

Description

• Non-invasive AC current sensor (20A max)
• Used for measuring alternating current
• Ferrite core material

Description

• Non-invasive AC current sensor (5A max)
• Used for measuring alternating current
• Ferrite core material

1Set SPI/IIC 10DOF 9 Axis Nine Shaft MPU9250 BMP180 Acceleration Altitude Sensor Module For Arduino 3.3V

Description

• Non-invasive AC current sensor (100A max)
• Output mode: 0-50mA
• Opening size: 13mm x 13mm
• Leading wire: 1m

Description

• Non-invasive AC current sensor (30A max)
• Output mode: Voltage/1V
• Opening size: 13mm x 13mm
• Leading wire: 1.5m