Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Description: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Description: Need to put your finger on the pulse of the Earth? Did I just blow your mind? A geophone works by translating ground movement into voltage, which can easily be read by a microcontroller. The SM-24 geophone element is designed to offer the highest performance in seismic exploration based upon field-proven I/O Sensor technology. Low distortion, combined with excellent specifications, provide high-fidelity data. Basically, it’s a super low frequency microphone for the ground.

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Description: This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a connection.

Description: These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

Description: This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Description: These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

Description: These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

Description: Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.

دقت ماژول24 بیت بوده و خروجی آن از نوع سریال می باشد  که از این رو براحتی با هر نوع میکرو کنترلر قابل برنامه نویسی هست.

Description: This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video below for a simple explanation on how these work and how to use them.

Description: This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.

Description: This wide bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.

Description

• Wheatstone bridge sensor
• Rated output: 600 μV/V
• Supply voltage: 3 -10 V DC
• RoHS compliant

Description

• Capacity: 20kg
• Wheatstone bridge sensor
• Small size: 55.25mm x 12.7mm x 12.7mm
• Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface
• Compensated temperature range: -10°C to +40°C
• Operating temperature range: -20°C to +55°C
• RoHS compliant

Description

• Capacity: 5kg
• Wheatstone bridge sensor
• Small size: 55.25mm x 12.7mm x 12.7mm
• Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface
• Compensated temperature range: -10°C to +40°C
• Operating temperature range: -20°C to +55°C
• RoHS compliant

Description

• Capacity: 780g
• Wheatstone bridge sensor
• Small size: 45mm x 9.3mm x 6mm
• Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface
• Compensated temperature range: -10°C to +40°C
• Operating temperature range: -20°C to +55°C
• RoHS compliant

Description

• Maximum load capacity: 100 kg
• Wheatstone bridge sensor
• Individually calibrated at the factory
• Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface  (not included)
• RoHS compliant

Description

• Single-zone force sensing resistor
• Device has a 5.6 mm diameter active area and is available in 4 connection options
• Part of the single zone Force Sensing Resistor family
• RoHS Compliant

Description

• Output sensitivity: mv/v 0.5±0.1
• Capacity: 500g
• Green: Sig + white:Sig -
• Recommended excitation voltage 5v

Description

• Measures compressive or tensile force
• Wheatstone bridge sensor
• Maximum load capacity: 500 kg
• RoHS compliant

Description

• Includes two sensors, hexapod foot caps, rubber bumpers, and hubs
• Compatible with the AH3-R and 3DOFA legs
• Comes in a pair

Description

• Single-zone force sensing resistor
• Device has a 14.7 mm diameter active area and is available in 4 connection options
• Part of the single zone Force Sensing Resistor family
• RoHS Compliant

Description

• Measures forces up to 2kg
• Current consumption at Max load: 1.45mA
• Comes with a 60cm Sensor Cable and 2 Rubber discs
• RoHS compliant

Description

• Weight sensor (Load cell) 0-50kg
• Rated output(MV/V): 2.0c2±0.15
• Accuracy class: C2
• Capacity: 50kg

Description

• First truly 3 axis force and 3D compliant sensor
• Measures slippage and shear forces
• High water, acid and heat resistance
• Safe overload: 600% of N.C (Fz)
• Nominal capacity (Fz): 60 N

Description

• First truly 3 axis force and 3D compliant sensor
• Measures slippage and shear forces
• High water, acid and heat resistance
• Safe overload: 600% of N.C (Fz)
• Nominal capacity (Fz): 100 N

Description

• Weight sensor (Load cell) 0-10kg
• Rated output(MV/V): 2.0c2±0.15
• Accuracy class: C2
• Capacity: 10kg

Description

• First truly 3 axis force and 3D compliant sensor
• Measures slippage and shear forces
• High water, acid and heat resistance
• Safe overload: 300% of N.C (Fz)
• Nominal capacity (Fz): 10 N

Description

• Weight sensor (Load cell) 0-40kg
• Rated output(MV/V): 2.0c2±0.15
• Accuracy class: C2
• Capacity: 40kg